Mr. Avraham presents,
To authorize the transfer of production licenses, technical assistance, and industrial cooperation necessary for Ukraine to manufacture Patriot air and missile defense systems and Patriot interceptor missiles under United States oversight, and for other purposes.
SECTION 2. FINDINGS.
Congress finds that—
No technology may be transferred beyond what is necessary for approved production.
SECTION 5. INDUSTRIAL PARTNERSHIPS.
The Department of Defense shall facilitate partnerships between approved United States defense contractors and qualified Ukrainian defense manufacturers.
Such partnerships may include—
Such contracts may supply—
Total Authorization: $4.5 billion.
(a) In General.—Notwithstanding any other provision of this Act, any agreement, license, contract, partnership, technology transfer, technical assistance, or industrial cooperation authorized under this Act shall require that—
(1) all Patriot air defense launchers, Patriot interceptor missiles, Patriot radar components, command-and-control equipment, replacement parts, maintenance equipment, and other Patriot-related equipment produced, assembled, or manufactured pursuant to this Act shall be produced, assembled, and manufactured entirely in the United States by United States persons or entities;
(2) all components, subassemblies, materials, parts, and raw materials incorporated into any such system or equipment shall be of United States origin and produced by United States persons or entities, except as provided in subsection (b);
(3) all manufacturing licenses, engineering documentation, production specifications, technical assistance, workforce training, quality assurance programs, and production certification assistance provided under this Act shall be performed by United States persons or entities located in the United States; and
(4) any joint venture, assembly facility, missile production plant, radar manufacturing facility, component manufacturing facility, maintenance depot, or research and development activity authorized under this Act shall be located in the United States and controlled by United States persons or entities.
(b) Limited Exceptions.—The requirements of subsection (a) may be waived by the Secretary of Defense, in coordination with the Secretary of State and the Secretary of Commerce, only if—
(1) the President determines in writing that a specific component or material is not produced in the United States in sufficient and reasonably available commercial quantities and of a satisfactory quality;
(2) the waiver is limited to the minimum extent necessary;
(3) the component or material is sourced from a country that is a NATO member or a major non-NATO ally; and
(4) the waiver is reported to the appropriate congressional committees not later than 15 days after the determination is made, together with a detailed justification and a plan to develop domestic production capacity for such component or material.
(c) Preference for American Workers and Companies.—In carrying out this Act, the Secretary of Defense shall give priority to—
(1) United States defense contractors and manufacturers that employ American workers;
(2) facilities located in the United States that maximize employment of United States citizens and permanent residents; and
(3) supply chains that strengthen the United States defense industrial base and create or retain jobs in the United States.
(d) Certification.—Before any production, assembly, or technology transfer begins under this Act, the Secretary of Defense shall certify to Congress that the requirements of this section have been met and that the proposed arrangement will increase employment of American workers and strengthen American defense companies.
(e) Definitions.—In this section:
(1) The term “United States person or entity” means a person or entity organized under the laws of the United States or any State, the majority of whose voting interests are owned by United States citizens or permanent residents, and that maintains its principal place of business in the United States.
(2) The term “of United States origin” means produced, manufactured, or assembled entirely within the United States from components and materials that are themselves of United States origin, consistent with the standards applied under the Buy American Act (41 U.S.C. 8301 et seq.) and section 2533a of title 10, United States Code (commonly known as the Berry Amendment), as applicable.
A BILL
To authorize the transfer of production licenses, technical assistance, and industrial cooperation necessary for Ukraine to manufacture Patriot air and missile defense systems and Patriot interceptor missiles under United States oversight, and for other purposes.
Patriot Co-Production and Ukrainian Air Defense Industrial Partnership Act of 2026
SECTION 1. SHORT TITLE.
This Act may be cited as the "Patriot Co-Production and Ukrainian Air Defense Industrial Partnership Act of 2026."SECTION 2. FINDINGS.
Congress finds that—
- Ukraine continues to face sustained missile and drone attacks against civilian and military infrastructure.
- Patriot air defense systems have proven effective in intercepting ballistic missiles and advanced aerial threats.
- Expanding production capacity among trusted allies strengthens the collective defense industrial base.
- Allowing licensed production in Ukraine will reduce delivery times, improve battlefield sustainability, and increase NATO-compatible manufacturing capacity.
- All technology transfers must remain subject to strict United States security, export-control, and end-use monitoring requirements.
SECTION 3. AUTHORIZATION FOR LICENSED PRODUCTION.
The President is authorized to negotiate agreements permitting licensed production within Ukraine of—- Patriot air defense launchers;
- Patriot interceptor missiles;
- Patriot radar components;
- command-and-control equipment;
- replacement parts and maintenance equipment; and
- other Patriot-related equipment approved by the Department of Defense.
SECTION 4. TECHNOLOGY TRANSFER.
The Secretary of Defense, in coordination with the Secretary of State, may provide—- manufacturing licenses;
- engineering documentation;
- production specifications;
- technical assistance;
- workforce training;
- quality assurance programs; and
- production certification assistance
No technology may be transferred beyond what is necessary for approved production.
SECTION 5. INDUSTRIAL PARTNERSHIPS.
The Department of Defense shall facilitate partnerships between approved United States defense contractors and qualified Ukrainian defense manufacturers.
Such partnerships may include—
- joint ventures;
- assembly facilities;
- missile production plants;
- radar manufacturing;
- component manufacturing;
- maintenance depots; and
- research and development cooperation.
SECTION 6. SECURITY REQUIREMENTS.
Before any production begins, the Secretary of Defense shall certify that—- manufacturing facilities meet United States security standards;
- cybersecurity protections meet Department of Defense requirements;
- classified information is adequately protected;
- all personnel undergo appropriate vetting; and
- production sites include physical security measures against espionage and sabotage.
SECTION 7. EXPORT CONTROLS.
Patriot systems or missiles produced under this Act—- remain subject to United States export control laws;
- may not be exported, transferred, or re-exported without prior approval of the United States Government;
- shall include end-use monitoring requirements; and
- shall remain compliant with all applicable arms transfer agreements.
SECTION 8. PROCUREMENT AUTHORITY.
The Department of Defense may enter into long-term procurement contracts with approved Ukrainian production facilities for Patriot systems and interceptor missiles.Such contracts may supply—
- Ukraine;
- the United States Armed Forces;
- NATO member states; and
- other countries approved under United States arms export laws.
SECTION 9. FUNDING.
Congress authorizes—- $2.5 billion over Fiscal Years 2025–2030 to establish licensed production facilities;
- $1 billion for workforce development and technical assistance;
- $500 million for cybersecurity, facility security, and technology protection;
- $500 million for production equipment and industrial modernization.
Total Authorization: $4.5 billion.
SECTION 10. OVERSIGHT.
Every six months, the Secretary of Defense shall submit a report to Congress detailing—- production capacity;
- missiles produced;
- security compliance;
- technology protection measures;
- facility inspections;
- financial expenditures; and
- any violations of licensing agreements.
(a) In General.—Notwithstanding any other provision of this Act, any agreement, license, contract, partnership, technology transfer, technical assistance, or industrial cooperation authorized under this Act shall require that—
(1) all Patriot air defense launchers, Patriot interceptor missiles, Patriot radar components, command-and-control equipment, replacement parts, maintenance equipment, and other Patriot-related equipment produced, assembled, or manufactured pursuant to this Act shall be produced, assembled, and manufactured entirely in the United States by United States persons or entities;
(2) all components, subassemblies, materials, parts, and raw materials incorporated into any such system or equipment shall be of United States origin and produced by United States persons or entities, except as provided in subsection (b);
(3) all manufacturing licenses, engineering documentation, production specifications, technical assistance, workforce training, quality assurance programs, and production certification assistance provided under this Act shall be performed by United States persons or entities located in the United States; and
(4) any joint venture, assembly facility, missile production plant, radar manufacturing facility, component manufacturing facility, maintenance depot, or research and development activity authorized under this Act shall be located in the United States and controlled by United States persons or entities.
(b) Limited Exceptions.—The requirements of subsection (a) may be waived by the Secretary of Defense, in coordination with the Secretary of State and the Secretary of Commerce, only if—
(1) the President determines in writing that a specific component or material is not produced in the United States in sufficient and reasonably available commercial quantities and of a satisfactory quality;
(2) the waiver is limited to the minimum extent necessary;
(3) the component or material is sourced from a country that is a NATO member or a major non-NATO ally; and
(4) the waiver is reported to the appropriate congressional committees not later than 15 days after the determination is made, together with a detailed justification and a plan to develop domestic production capacity for such component or material.
(c) Preference for American Workers and Companies.—In carrying out this Act, the Secretary of Defense shall give priority to—
(1) United States defense contractors and manufacturers that employ American workers;
(2) facilities located in the United States that maximize employment of United States citizens and permanent residents; and
(3) supply chains that strengthen the United States defense industrial base and create or retain jobs in the United States.
(d) Certification.—Before any production, assembly, or technology transfer begins under this Act, the Secretary of Defense shall certify to Congress that the requirements of this section have been met and that the proposed arrangement will increase employment of American workers and strengthen American defense companies.
(e) Definitions.—In this section:
(1) The term “United States person or entity” means a person or entity organized under the laws of the United States or any State, the majority of whose voting interests are owned by United States citizens or permanent residents, and that maintains its principal place of business in the United States.
(2) The term “of United States origin” means produced, manufactured, or assembled entirely within the United States from components and materials that are themselves of United States origin, consistent with the standards applied under the Buy American Act (41 U.S.C. 8301 et seq.) and section 2533a of title 10, United States Code (commonly known as the Berry Amendment), as applicable.
SECTION 12. TERMINATION.
The President may suspend or terminate any licensing agreement if—- technology is compromised;
- security requirements are violated;
- Ukraine transfers Patriot technology without authorization;
- production is no longer consistent with United States national security interests; or
- Congress enacts legislation directing termination.
PES: The Patriot Co-Production and Ukrainian Air Defense Industrial Partnership Act authorizes the United States Government to establish licensed manufacturing partnerships that allow Ukraine to produce Patriot air and missile defense systems and interceptor missiles under strict U.S. oversight. The legislation is intended to strengthen Ukraine's ability to defend against missile and drone attacks while expanding the collective defense industrial capacity of the United States and its allies. Section 11, as amended, requires that everything related to Patriot systems under the bill launchers, missiles, radars, parts, manufacturing, training, and facilities—must be made in America by American companies and workers. It bans production or assembly in Ukraine (or anywhere else outside the U.S.). Only limited exceptions are allowed if something truly cannot be made in the U.S., and even then it must come from a close ally and be reported to Congress quickly, with a plan to make it in America later.