The House will now vote on whether to adopt the below amendment to the Patriot Co-Production and Ukrainian Air Defense Industrial Partnership Act of 2026. Additions are in green and subtractions are in red. A simple majority is required for adoption. The vote will last 24 hours, ending at 10:28pm CT on 8/6/2026.
SEC. __. BUY AMERICAN REQUIREMENTS.
(a) In General.—Notwithstanding any other provision of this Act, any agreement, license, contract, partnership, technology transfer, technical assistance, or industrial cooperation authorized under this Act shall require that—
(1) all Patriot air defense launchers, Patriot interceptor missiles, Patriot radar components, command-and-control equipment, replacement parts, maintenance equipment, and other Patriot-related equipment produced, assembled, or manufactured pursuant to this Act shall be produced, assembled, and manufactured entirely in the United States by United States persons or entities;
(2) all components, subassemblies, materials, parts, and raw materials incorporated into any such system or equipment shall be of United States origin and produced by United States persons or entities, except as provided in subsection (b);
(3) all manufacturing licenses, engineering documentation, production specifications, technical assistance, workforce training, quality assurance programs, and production certification assistance provided under this Act shall be performed by United States persons or entities located in the United States; and
(4) any joint venture, assembly facility, missile production plant, radar manufacturing facility, component manufacturing facility, maintenance depot, or research and development activity authorized under this Act shall be located in the United States and controlled by United States persons or entities.
(b) Limited Exceptions.—The requirements of subsection (a) may be waived by the Secretary of Defense, in coordination with the Secretary of State and the Secretary of Commerce, only if—
(1) the President determines in writing that a specific component or material is not produced in the United States in sufficient and reasonably available commercial quantities and of a satisfactory quality;
(2) the waiver is limited to the minimum extent necessary;
(3) the component or material is sourced from a country that is a NATO member or a major non-NATO ally; and
(4) the waiver is reported to the appropriate congressional committees not later than 15 days after the determination is made, together with a detailed justification and a plan to develop domestic production capacity for such component or material.
(c) Preference for American Workers and Companies.—In carrying out this Act, the Secretary of Defense shall give priority to—
(1) United States defense contractors and manufacturers that employ American workers;
(2) facilities located in the United States that maximize employment of United States citizens and permanent residents; and
(3) supply chains that strengthen the United States defense industrial base and create or retain jobs in the United States.
(d) Certification.—Before any production, assembly, or technology transfer begins under this Act, the Secretary of Defense shall certify to Congress that the requirements of this section have been met and that the proposed arrangement will increase employment of American workers and strengthen American defense companies.
(e) Definitions.—In this section:
(1) The term “United States person or entity” means a person or entity organized under the laws of the United States or any State, the majority of whose voting interests are owned by United States citizens or permanent residents, and that maintains its principal place of business in the United States.
(2) The term “of United States origin” means produced, manufactured, or assembled entirely within the United States from components and materials that are themselves of United States origin, consistent with the standards applied under the Buy American Act (41 U.S.C. 8301 et seq.) and section 2533a of title 10, United States Code (commonly known as the Berry Amendment), as applicable.
PES OF AMENDMENT: This amendment requires that everything related to Patriot systems under the bill launchers, missiles, radars, parts, manufacturing, training, and facilities—must be made in America by American companies and workers.
It bans production or assembly in Ukraine (or anywhere else outside the U.S.). Only limited exceptions are allowed if something truly cannot be made in the U.S., and even then it must come from a close ally and be reported to Congress quickly, with a plan to make it in America later.
SEC. __. BUY AMERICAN REQUIREMENTS.
(a) In General.—Notwithstanding any other provision of this Act, any agreement, license, contract, partnership, technology transfer, technical assistance, or industrial cooperation authorized under this Act shall require that—
(1) all Patriot air defense launchers, Patriot interceptor missiles, Patriot radar components, command-and-control equipment, replacement parts, maintenance equipment, and other Patriot-related equipment produced, assembled, or manufactured pursuant to this Act shall be produced, assembled, and manufactured entirely in the United States by United States persons or entities;
(2) all components, subassemblies, materials, parts, and raw materials incorporated into any such system or equipment shall be of United States origin and produced by United States persons or entities, except as provided in subsection (b);
(3) all manufacturing licenses, engineering documentation, production specifications, technical assistance, workforce training, quality assurance programs, and production certification assistance provided under this Act shall be performed by United States persons or entities located in the United States; and
(4) any joint venture, assembly facility, missile production plant, radar manufacturing facility, component manufacturing facility, maintenance depot, or research and development activity authorized under this Act shall be located in the United States and controlled by United States persons or entities.
(b) Limited Exceptions.—The requirements of subsection (a) may be waived by the Secretary of Defense, in coordination with the Secretary of State and the Secretary of Commerce, only if—
(1) the President determines in writing that a specific component or material is not produced in the United States in sufficient and reasonably available commercial quantities and of a satisfactory quality;
(2) the waiver is limited to the minimum extent necessary;
(3) the component or material is sourced from a country that is a NATO member or a major non-NATO ally; and
(4) the waiver is reported to the appropriate congressional committees not later than 15 days after the determination is made, together with a detailed justification and a plan to develop domestic production capacity for such component or material.
(c) Preference for American Workers and Companies.—In carrying out this Act, the Secretary of Defense shall give priority to—
(1) United States defense contractors and manufacturers that employ American workers;
(2) facilities located in the United States that maximize employment of United States citizens and permanent residents; and
(3) supply chains that strengthen the United States defense industrial base and create or retain jobs in the United States.
(d) Certification.—Before any production, assembly, or technology transfer begins under this Act, the Secretary of Defense shall certify to Congress that the requirements of this section have been met and that the proposed arrangement will increase employment of American workers and strengthen American defense companies.
(e) Definitions.—In this section:
(1) The term “United States person or entity” means a person or entity organized under the laws of the United States or any State, the majority of whose voting interests are owned by United States citizens or permanent residents, and that maintains its principal place of business in the United States.
(2) The term “of United States origin” means produced, manufactured, or assembled entirely within the United States from components and materials that are themselves of United States origin, consistent with the standards applied under the Buy American Act (41 U.S.C. 8301 et seq.) and section 2533a of title 10, United States Code (commonly known as the Berry Amendment), as applicable.
PES OF AMENDMENT: This amendment requires that everything related to Patriot systems under the bill launchers, missiles, radars, parts, manufacturing, training, and facilities—must be made in America by American companies and workers.
It bans production or assembly in Ukraine (or anywhere else outside the U.S.). Only limited exceptions are allowed if something truly cannot be made in the U.S., and even then it must come from a close ally and be reported to Congress quickly, with a plan to make it in America later.